Most important wear aspects.

Wear is a surface phenomenon that occurs by the displacement and detachment of material. Because wear implies a loss of weight over a period of time, it generally differs from breakage, fractures and plastic deformation.

Wear-solidity is a system property.

The tribological system :

- Basic body - Opposite body - Interspace material - Environment medium - Relative movement - Contact temperature - Normal force The effects of the tribological interactions: - Friction - Wear - Surface quality loss The four basic wear mechanisms : - Adhesive wear - Abrasive wear - Tribochemical interactions - Fatigue (Surface fatigue)

To reduce or eliminate the above-mentioned adhesive wear, the friction drilling process can be done using the Drabus frictiondrill paste HTP or -fluid HTF.
The HTP is a paste that is composed of a fixed lubricant and a mineral oil.
HTF is a fluid mixture composed of the same components as the paste, but it can also be used as a spray.
During the frictiondrilling process, both the HTP and HTF products produce a fixed grease- and dividing film which is high pressure-resistant. The dividing and lubricating properties are maintained within the temperature range from -20°C to +1150°C. The mineral oil evaporates at high temperature, so there is no or only a small remainder left on the workpiece.

How to use these lubricants ?

How to order ?