DRABUS tool holders - group 18
 

 

 
During the frictiondril process, the material glows light-red and the Drabus frictiondrill itself should glow dark-red.
So, the tool holder has two functions.
The first function is to clamp the Drabus frictiondrill. The Drabus frictiondrill does not centre itself. From the moment that the Drabus frictiondrill has made contact with the cold workpiece surface, it has the tendency to walk sideways. So, the position of the Drabus frictiondrill should be determined by the rigidity of the machine and the precision of the rotation of the tool holder and the machine.
The second function of the tool holder is to discharge the generated friction heat. This is necessary to prevent the friction heat from warming up the spindle and the bearings of the drilling machine. The outside cooling is a fixed part of the tool holder and is able to discharge the heat in a continual or interrupted process..
 
 CM-Holders
CM Typ L L1 d D article number
2 ER25 140 60 2-16 65 18ER25MT02
3 ER32 172 72 2-20 80 18ER32MT03
4 ER32 210 86 2-20 110 18ER32MT04
4 ER40 208 80 3-26 110 18ER40MT04
 
 ISO-Holders - DIN2080
SK Typ L L1 d D article number
30 ER25 148 80 2-16 75 18ER25SK30
30 ER32 149 80 2-20 85 18ER32SK30
40 ER32 188 95 2-20 85 18ER32SK40
 
 MAS-BT-Holders
SK Typ L L1 d D article number
40 ER40  185  90 3-26  85 18ER32BT40
 
 CNC-Holders - DIN69871 A
SK Typ L L1 d D article number
40 ER25  196  98 2-16  59 18ER25CN40
40 ER32 173 105 2-20 69 18ER32CN40
 
 WELDON-Holders - DIN1835B
Ø Typ L L1 d D article number
16 ER25 117 63 2-16 65 18ER25WD16
20 ER25 117 63 2-16 80 18ER32WD20
25 ER32 134 72 2-20 110 18ER32WD25
 
DRABUS collets - group 18
 

The correct use of the collet is very important. Before putting the collet into the tool holder, the collet must first be put into the coupling nut. After that, the coupling nut and the collet must be assembled together into the tool holder. Before tightening the coupling nut, the shank of the Drabus frictiondrill must be put into the collet with the collar against the outside of the collet. The coupling nut must be tightened firmly with the correct tool.

Remark: All the tangent planes, namely the inside (spindle) and outside (tool holder) tapers, have to be cleaned before assembling the parts.


Type ER25 with D=26 mm and L=35 mm
For Ø (mm) 		Article number Accessories Article number

4
6
8
12
16

18ER2500040
18ER2500060
18ER2500080
18ER2500120
18ER2500160

WRENCH ER25

NUT ER25

18ER25CH42

18ER25MOER
Type ER32 with D=33 mm and L=40 mm
For Ø (mm) 		Article number Accessories Article number

4
6
8
12
16
18

18ER3200040
18ER3200060
18ER3200080
18ER3200120
18ER3200160
18ER3200180

WRENCH ER32

NUT ER32

18ER32CH50

18ER32MOER
Type ER40 with D=41 mm and L=46 mm
For Ø (mm) 		Article number Accessories Article number

4
6
8
12
16
18
22
24

18ER4000040
18ER4000060
18ER4000080
18ER4000120
18ER4000160
18ER4000180
18ER4000220
18ER4000240

WRENCH ER40

NUT ER40

18ER40CH63

18ER40MOER